1969 Dodge Dart Swinger clean up
Torqued the K frame bolts to 150 ft-lbs.
Exhaust going up, just gotta remember not to get under the back of the car as lift is not locked.
Had to cut this to remove as they welded the bracket to the car. Lined up with a 2 x 4 holding it up tight and TIG'd it back together.
Exhaust up into place, other than collector flanges are just pegged.
First time door #4 has been up in 3 months.
My helpers putting the rear axle assembly into place.
Made sure the car balanced okay before I pulled the K frame holder out.
Lowered the car almost to the floor and put the front hangers into place.
Almost there.
Remember shop safety!
Torqued the K frame bolts to 150 ft-lbs.
Exhaust going up, just gotta remember not to get under the back of the car as lift is not locked.
Had to cut this to remove as they welded the bracket to the car. Lined up with a 2 x 4 holding it up tight and TIG'd it back together.
Exhaust up into place, other than collector flanges are just pegged.
First time door #4 has been up in 3 months.
My helpers putting the rear axle assembly into place.
Made sure the car balanced okay before I pulled the K frame holder out.
Lowered the car almost to the floor and put the front hangers into place.
Almost there.
Remember shop safety!
