Got my cam.

circlepilot said
Something that is a first for me, (but it wouldn't be the first time I've come across something that has been a common practice, but new to me) in the installation instructions, "if you are using double spring assembly, along with a flat tappet cam, you must break in the cam with the outer springs only. Assemble the head with the outer springs only until break-in is achieved."
Norm

Yup. That's the proper procedure for breaking a flat tappet with dual sprAngs. Although I've done a lot of them without removing the inner sprAng and not had a failure......it's really best to do it. That's one of the reasons I stayed clear of a cam with high enough lift to need a double sprAng.