69 barracuda grille depth
Heres pix of the mounting setup so far, and how I intend to route the steel hard line. .050" thick steel shelving sheetmetal cut and bent. I used the existing tooling hole in the lower radiator support sheetmetal. Just drilled it the rest of the way through with a unibit, then added a second one above it. These line up with my trans cooler thermostat which will be on the other side mounted to the framerail.
Heres pix of the mounting setup so far, and how I intend to route the steel hard line. .050" thick steel shelving sheetmetal cut and bent. I used the existing tooling hole in the lower radiator support sheetmetal. Just drilled it the rest of the way through with a unibit, then added a second one above it. These line up with my trans cooler thermostat which will be on the other side mounted to the framerail.
