Hi Guys,
My 74 Dart needed LCA bushings. I had both sides replaced with Pro Forged kit.
The right side shaft tightened and was torqued. The left side shaft got six threads tight and started to spin shaft and bushing. Not good. The shaft is still in frame, I pushed the LCA away and out from under.
Working on the concrete and under the car port. Upon inspection, the bushing was greased inside the shell. After the fact, I read the factory manual which states- No grease or lubricants.
I think this is why the shaft and bushing spun.
Can I install a new bushing and shaft into the same shell, cleaned completely of grease?
The LCA arms are original.
The Landlord wants this car on all wheels and moved. Or He will have it towed.
I am spun about the drama. any experience or helpful ways would be appreciared.
thanks,
Dave
[email protected]