Drilling my Zbar??

Also for the z bar (technically it's a torque shaft) you can slot the holes on the bellhousing bracket to help correct the angle. That bracket does not look like the factory or reproduction units that I have and use FYI. Looks home made to me so it is also suspect.

On the pedal to shaft rod the bb and sb are the same length. They repro the smaller one but the 7/16" 340/383 versions can be hard to come by. If it doesn't deflect, run it. Be aware that the rod is case hardened so if you try to bend it you will soon find youself eith two halves. Dont ask me how I know that.

To take the clutch pedal assembly out you must removed the steering column and it will come right out.