What rear suspension for bracket racing.

When i had the stock 62 springs in the car, i made my own clamps. I used 1/4x1" steel, tapped the bottom pieces for 3/8 bolt, clearance in the top. I think i made three sets for each side.
Problem was, with the stock leaves, stock front spring eye location, and CE shocks, i had way too much rear end lift, at the hit. Body rise was so fast and high (more than the front was lifting) that the shocks would top out and unload the tires. I put on ss springs, lowered the front spring eye, and then the CE shocks did okay.