67 twin turbo dart
Well got the new fitting in for the oil psi sender so now its inline. Wired in the trans brake. But last time running noticed the center brake line on the proportioning valve was dripping fluid odd wasn't before. Removed the hot side pipe drivers side to get to the brake lines. Checked the tightness and they were just a tiny bit loose but not enough to leak. Retightened all lines and rechecked, pumped the brakes and still leaks. So found some brake fluid resistant sealant its also for hydraulic's. So ordered that so we shall see, course that means bleeding the brakes again lol.
Well got the new fitting in for the oil psi sender so now its inline. Wired in the trans brake. But last time running noticed the center brake line on the proportioning valve was dripping fluid odd wasn't before. Removed the hot side pipe drivers side to get to the brake lines. Checked the tightness and they were just a tiny bit loose but not enough to leak. Retightened all lines and rechecked, pumped the brakes and still leaks. So found some brake fluid resistant sealant its also for hydraulic's. So ordered that so we shall see, course that means bleeding the brakes again lol.