72Dart6pack
Harder Better Faster Stronger.
Got the TTI shift linkage to clear today. Yippie
What Are You Doing To/With Your Car Today?
- Thread starter MobileCustoms
- Start date
-
diymirage
HP@idle > hondaHP@redline
Shouldn't you have one washer one each side of the linkage ?
MOPAROFFICIAL
Oogliboogli
4spd?
You can see the instructions online and just cut and weld it an inch over.
At least that's what I did
Tuning in a Carb today on the Run Stand, getting it all set up and adjusted right.
It's going on a fresh built 383 tomorrow for the initial run in.
Always shoot for instant starts, then get them up to 2000 rpm quick and run in the cam for a half hour.
It's going on a fresh built 383 tomorrow for the initial run in.
Always shoot for instant starts, then get them up to 2000 rpm quick and run in the cam for a half hour.
72Dart6pack
Harder Better Faster Stronger.
Probably? I'll fix it. Thanks for noticing.
I'm sure you'll want to drive it now to make sure it shifts correctly. Lol
diymirage
HP@idle > hondaHP@redline
yes, but only for your own safety, im sure you understandProbably? I'll fix it. Thanks for noticing.
72Dart6pack
Harder Better Faster Stronger.
Thanks for looking out for the safety of other FABO members. Lol
diymirage
HP@idle > hondaHP@redline
anytime brother
and as others have pointed out...that is not a courtesy i just extend to anyone
72Dart6pack
Harder Better Faster Stronger.
diymirage
HP@idle > hondaHP@redline
im gonna drive that six pack so fast no one will see my any way, i'll look like a big blur
you know, in the interest of safety
I'm taking my Barracuda out in a few minutes to "test on the Sure Grip"!
Ya know, just to be sure......
Jeff
Ya know, just to be sure......
Jeff
Challngd73
Well-Known Member
Swingin Chrome
Well-Known Member
408 finally going in
Setting up for 383 Run In, got caught short for time on Father's Day.
Dang, need more Engine Run Stands.
To be continued . . . .
☆☆☆☆☆
318 neutral balance flywheel inside the 727 transmission case to be able to run the starter without having to turn the workings of the transmission. 383 first run in.
Can't afford a 500 dollar big block bell housing to use on the run stand, so you got to make do with what you got.
Mopar to You . . .
Dang, need more Engine Run Stands.
To be continued . . . .
☆☆☆☆☆
318 neutral balance flywheel inside the 727 transmission case to be able to run the starter without having to turn the workings of the transmission. 383 first run in.
Can't afford a 500 dollar big block bell housing to use on the run stand, so you got to make do with what you got.
Mopar to You . . .
72Dart6pack
Harder Better Faster Stronger.
From 318 2bbl linkage to 408 6 Pack linkage. Don't ask how long that took to design & build.
More cleaning and painting of parts.
I detailed the A/C compressor in place. I use old towels to mask around irregular shapes. Turned out not bad.
72Dart6pack
Harder Better Faster Stronger.
Damn close to a original one. Made it myself.
72Dart6pack
Harder Better Faster Stronger.
So we can rule out your car made those marks. Looks Photo shopped to me.
diymirage
HP@idle > hondaHP@redline
how bout a video of your car...i dont know...running?So we can rule out your car made those marks. Looks Photo shopped to me.
just idling will be enough
72Dart6pack
Harder Better Faster Stronger.
How long do I have? Lolhow bout a video of your car...i dont know...running?
just idling will be enough
diymirage
HP@idle > hondaHP@redline
i dont know, how long are those marks...30, 40 feet?
what do you need, a week per foot?
or a month?
or do you need me to run put down some longer marks?
72Dart6pack
Harder Better Faster Stronger.
It's like the cute girl people post as there Girlfriend but there never in the same photo. Just saying. Just pulling your chain. Lol
Just pulling your chain. Lol -
