Recommended fuel pump?
I'm currently using a Quickfuel 750. According to their website, they recommend 6.5 psi with a max of 7. The carter strip states 6.9 to 9.5, so that may not be a great choice. (without a regulator
it's simple Simon, get a good pump and use a regulator
a Holley "red" or "blue" will do the trick for you as will the Carter or any pump that can produce 7+ psi, correct size AN fittings and a fuel pressure regulator (I prefer one with a gauge port), your carb feed line should have a gauge after the regulator and be as close to the carb as possible
fuel line hard 90's and long runs after the regulator can rob some pressure as will mismatched line ID's, a liquid filled gauge mounted close to the carb will likely get hot and misread after a while, you'll get a good reading from it for long enough to get the pressure set, as long as the reading at the regulator stays set you should be good
FYI, there's a ****-ton of good reading out there and an amazing array of ways to get this done, your wallet may be the deciding factor. IIRC the "old school" hot rod method is tank, filter, pump, filter, regulator, carb. You should also read up on return lines, they are not always required.
Good luck with it