68 valiant signet
i made a start on the hole in the hood today. first was to make a template that fitted pretty close round the carbs etc, i drew underneath the card holding the sharpie vertical (ish). then transfer that to the hood with measurements and finally the first cut. i've cut slightly smaller on purpose, you can always cut more but if you cut too far one way due to a **** up with the measuring then you're done. next job is get ashley here to help me bolt it in place for final trimming.
neil.
i made a start on the hole in the hood today. first was to make a template that fitted pretty close round the carbs etc, i drew underneath the card holding the sharpie vertical (ish). then transfer that to the hood with measurements and finally the first cut. i've cut slightly smaller on purpose, you can always cut more but if you cut too far one way due to a **** up with the measuring then you're done. next job is get ashley here to help me bolt it in place for final trimming.
neil.
