Cam upgrade for my truck, '72 D200 with a 360
Flat out your cam lobe peaks have worn down and your lifters are also cupped because of it too. So getting back to your stock grind numbers will be a big improvement and it will run nice again too.
Melling SPD-22
Lift 430 / 444
Duration 276 /279
Good Replacement Cam.
☆☆☆☆☆
Worn 360 original cam,
lobes are wearing down.
Can expand up this picture to view.
Replaced with the Melling SPD-22 cam
Running Very Nice, all around.
Best to use the Melling lifters with the new Melling SPD-22 cam so you don't have a lifter failure at cam break in.
Flat out your cam lobe peaks have worn down and your lifters are also cupped because of it too. So getting back to your stock grind numbers will be a big improvement and it will run nice again too.
Melling SPD-22
Lift 430 / 444
Duration 276 /279
Good Replacement Cam.
☆☆☆☆☆
Worn 360 original cam,
lobes are wearing down.
Can expand up this picture to view.
Replaced with the Melling SPD-22 cam
Running Very Nice, all around.
Best to use the Melling lifters with the new Melling SPD-22 cam so you don't have a lifter failure at cam break in.