Drilling my Zbar??
I had a problem with my clutch release being too low for my liking. The problem I found with lower the attachment point for the rod off the pedal was the rod would come in contact with the firewall since it is now at a different angle. Instead, I moved the hole for the rod that goes to the fork. This worked much better. I've always hated the sloppy factory clutch linkage, so I made new rods with heim joints. This modification made an amazing difference. It's almost like I have a hydraulic clutch now.
I had a problem with my clutch release being too low for my liking. The problem I found with lower the attachment point for the rod off the pedal was the rod would come in contact with the firewall since it is now at a different angle. Instead, I moved the hole for the rod that goes to the fork. This worked much better. I've always hated the sloppy factory clutch linkage, so I made new rods with heim joints. This modification made an amazing difference. It's almost like I have a hydraulic clutch now.