Alright, school me on stock roller cams....

Here's the numbers off a 2002 5.9 cam.

Duration @ 0.050: I/E 189*/194*
Lobe separation angle: 111*
Lift @ cam: I/E 0.273"/0.278"
Valve lift w/ 1.6 rockers: I/E 0.437”/0.445”

I sent it to Bullet to get reground and asked if they would give me the stock specs (or close since it had some wear) first.

I think some of the published specs for the 5.9 got messed up and the 5.2 cam is not bigger than the 5.9 cam. But it has been discussed many times and all I have is the numbers above so I can't prove anything.