Kelsey Hayes SBP disc brake questions

Kelsey Hayes SBP disc brake questions

Thanks guys, caliper ears are 1/2" thick. The bolts in my parts manual pic Im pointing at dont look completely threaded to me?? Appear to have a shoulder.
In another FSM pic(sectional) you can see the bolt with shoulder.
Weird....anyone got the length of threaded portion?

MoparLeo said
If you look at the diagram from the FSM it shows a completely threaded bolt from the caliper bracket.
The bolt you are pointing to in the diagram is the knuckle to lower ball joint bolt and has a caste nut on the ball joint side.
Flip the caliper assembly over, we are only seeing the back side.

cudamark said
You have even less space than mine. If I bottom out my bolts, I have a 7/8" gap where the caliper ears go. Add a washer and the hardline bracket, and it clamps down just fine. What does your caliper ear measure?

cudamark said
I agree with MoparLeo, the bolts you are pointing to are the ones that hold the lower ball joint on. I presume the ones you have a question about are the ones that hold the caliper to the spindle, correct?