Stop in for a cup of coffee

Mattax said
:rofl:

You bustin' my chops?

No silly.

You said the neutral safety doesn't seem to work.
Right?
I said take a pencil and follow the path to the place your checking, that you say isn't working.
Just like you started to describe here.

Place pencil on the battery and follow along the path the goes through the test lamp and back to the battery.
Like orange arrows here:
View attachment 1715782391

Here's your colored pencil.
View attachment 1715782390

Mark where you attached the test lamp and then see use the pencil to if you've made a complete path.

Follow?

So here it is.

purple= key off, positive power(red light in test light)

orange = key held in start position, tested positive for power

Green = tested positive for power in the run position.

Pink was tested with a voltage meter on 200 ohms for continuity between the wire coming from the switch on the trans to the starter relay up on the fire wall, with trans in park and neutral. Multimeter shows an O.C on the read out. Instruction booklet says that’s an open circuit and no continuity?