The heater portion of the HVAC system is done. I used the DMT HVAC restoration kit for all the seals for both the AC side and now the finishing up with the heater side:
The floor heat vent seal:
View attachment 1715796959
The other side that is seen when open got sanded, primed and painted black:
View attachment 1715796960
The fresh air door gets seals on both sides:
View attachment 1715796961
It gets a new heater core from my parts stache:
View attachment 1715796963
I applied new seam sealer around the perimeter of the core and installed it to the case. A new gasket and tube alignment plate completed that part of the rebuild:
View attachment 1715796965
After cleaning the fresh air vent door, it got a new seal on the inside and coat of black paint on the exterior of the door:
View attachment 1715796966
Install the resistor:
View attachment 1715796983
and install the box to lower cowl seal and blower motor rear seal:
View attachment 1715796982
and ready to install
View attachment 1715796985
View attachment 1715796964