67/68/69 cuda dilemma
More rust jerky from the left hand side. Back sections of the rockers are pitted, but solid. I will re assess them after sandblasting as to weather or not I will need to cut n patch them. That will be determined on weather or not I end up with holes. But then again, I may still patch them anyways lol.
What makes quick an easy work with spot welds is my method. There are many ways to do this, but this is how I do it. I use a home made chisel splitter with a razor sharp .063" thick stainless blade. I use ball rotary files to weaken the welds on the side I am discarding, than hammer the splitter in there to cut the welds.
More rust jerky from the left hand side. Back sections of the rockers are pitted, but solid. I will re assess them after sandblasting as to weather or not I will need to cut n patch them. That will be determined on weather or not I end up with holes. But then again, I may still patch them anyways lol.
What makes quick an easy work with spot welds is my method. There are many ways to do this, but this is how I do it. I use a home made chisel splitter with a razor sharp .063" thick stainless blade. I use ball rotary files to weaken the welds on the side I am discarding, than hammer the splitter in there to cut the welds.