Small block TrickFlow heads part 1
Ok this is going across the shortside floor. The straight, common wall tapers in almost the whole way down to the shortside losing area. As you can see my meter is pegged 3/4 of the way across then starts backing off rapidly. The shortside is blocking that area and that is the real good air heading into the center of the head chamber. At .550 lift it only gets worse. These heads are very nice but don’t even think about going with a bigger valve or making big horsepower till that’s addressed. Is there metal left to open it up. Hopefully time will tell. I’m going to flow the exhaust
tomorrow and try to call TrickFlow. I tried today but it was close to closing time and no one picked up. They did exactly what they wanted to do with this head. They made a great street, street strip head. Mission accomplished.
Ok this is going across the shortside floor. The straight, common wall tapers in almost the whole way down to the shortside losing area. As you can see my meter is pegged 3/4 of the way across then starts backing off rapidly. The shortside is blocking that area and that is the real good air heading into the center of the head chamber. At .550 lift it only gets worse. These heads are very nice but don’t even think about going with a bigger valve or making big horsepower till that’s addressed. Is there metal left to open it up. Hopefully time will tell. I’m going to flow the exhaust