360 Street/Strip Cam?

CluelessMopar said
Hey guys!

Any suggestions on a solid performing street/strip cam for a Mopar 360? The 360 is out of a 76 motorhome and is mostly stock other than a Holley Sniper EFI & Hyperspark setup I've added.

When I do a cam swap I was also going to do a Air Gap intake. Is there value in this for a street car? Or should I stick with my dual plane intake? My end goal is to have a naturally aspirated 360 running in the mid-high 11's that's still street drivable. Is this achievable or should I be focusing on either strip performance or street performance?

Picture for attention...

Thanks!

View attachment 1715810529

Its more than doable. That's essentially my goal too but for me I'm after a near stock idle or at least an idle that doesn't hint at its performance. I chose a Crower 282HDP cam part no# that's 222/234 on a 112 LSA, barring that I have the 292HDP 227/237 112 on the shelf ill try if I need more rpm. What you really need to get it done is at least 11-1 comp and this requires a good tune. Build the best short block you can first then go from there.

Good Luck.