Cam for a 318

Dan the man said
For the 318, would the lunati 701 be a good choice for what I'm wanting to do or the 700? I used a compression ratio calculator put in all the required information and it said that I would have a 9.40:1 CR. Is that a good compression ratio for either 1 of those cams? I don't want to have to back off the ignition timing because the cam isn't matched to the cam.

I have the 701 in my 318.
Eddy Performer
600 cfm carb
It was decent, but I wished that I'd have gone with the 702 at the time.

Detonated my 7 1/4 pegleg with 2.76 gears if I remember right within two years.

With my 4.10 gears, that cam is pure ***, and needs a 703 and more compression at a minimum.