Pictures needed for 273 motor mounts in a 65 Dart/Valiant

From this thread:
318\a904 swap in 65 barracuda

See post # 12.

I found this:

You also need a plan for your exhaust- if you have power steering, you basically have one choice: the early A smallblock manifolds. BUT BEWARE! With your '87 motor, you have air injection ports below the exhaust ports that need to be plugged (search the thread under smallblock motors). After you do that, you'll find that the extended pad beneath the #7 port prevents the manifold from properly seating. A little judicious grinding with a Dremel USUALLY takes care of it, but go SLOWLY! If you take too much, or core shift is really bad, you run the risk of breaking into a coolant passage, and you've got a junk head on your hands (go ahead, ask me how I know...). At a minimum, you'll need the driver's side manifold- the truck manifold can work on the passenger side.