Stroke with only Pistons and Crank?

RustyRatRod said

I wasn't aware the piston heads were that thick. That's over 1/4" (.250") difference. I bet the piston heads are pretty thin.

Click to expand...

I believed the 72-73 340 piston is used which has a lower CH of 1.74 ish verus the 70ish 340 piston 1.84 ish CH....So about .080 plus or minus needs to b e milled from the piston if you use the 360 1.66 CH....

Easier to buy 360 pistons these days....