Classic Auto Air in 67 Barracuda Factory Non AC
I'm not having the same luck with the evaporator fitting.
1st photo, on the firewall you can see the silver dots, is relatively where the speed nuts to mount the evaporator are, 3 lines are touching the firewall, both sides and the bottom
2nd photo, I decided just to cut the firewall for clearance
3rd photo, evaporator mounted in. Bolts in the holes they are supposed to be mounted in, have clearance now with 3/4" cut out of the bottom
4th photo, inside mounts don't line up either
Frustrating, thought this would be fairly straight forward.
I'm not having the same luck with the evaporator fitting.
1st photo, on the firewall you can see the silver dots, is relatively where the speed nuts to mount the evaporator are, 3 lines are touching the firewall, both sides and the bottom
2nd photo, I decided just to cut the firewall for clearance
3rd photo, evaporator mounted in. Bolts in the holes they are supposed to be mounted in, have clearance now with 3/4" cut out of the bottom
4th photo, inside mounts don't line up either
Frustrating, thought this would be fairly straight forward.
