assembly questions

AJ/FormS said
I am almost 100% sure ;
>That slider is NOT an A833.
>That slider is an A230
>That Neither of those front hubs are A833

Hang on; we'll get a second opinion.
@CudaFactHackJob , what say you?
anyone else?

I have used the A230 slider in an A833 so I know it works.
But like in a previous post, I was unsuccessful in using the A230 hub. Since I had a boxfull of hubs I just used the proper one.

Could you measure one hub for me? I might have another one but need to find it first...

The hub + 3rd gear stacked together on the bench has a height of 66.70mm (2.626") - see pic.
Distance between shoulder on mainshaft and snap ring groove is 66.10mm (2.603").
Snap ring groove is 2.70mm wide and snap ring 2.20mm giving me 0.50mm play in the groove - but I need 0.60mm (66.70 - 66.10 = 0.60)

That means I need to gain 0.10mm clearance minimum.