Ax15 Trans

DionR said

The Dakota V6 bell will fit all of the “big” pattern Aisin trans. Only drawbacks are the required 143T flywheel unless you move the starter pocket, and the bell is bigger than a standard bell and makes exhaust routing a little more difficult.

Oh, and they are a juice clutch only.

Click to expand...

might get away with a denso starter off a dakota with the pinion swapped for a 9 or 10 tooth 25 mm one. either one for a birt brin bellhousing/starter or one from Europe: WOSP engineering. or Australia: Castle Auto Electronics.

That usually caters for big flywheel/ring gear in small bellhousing with standard Mopar starter mounting pattern. Its the standard set up for most Austrlian and south African Mopars that used local transmissions from local borg warner (mopar mount with 25 or 27 mm pinion on a bosch version of the mopar standard starter) rather than standard US MOPAR 727/904/ 3 or 4 speed which used mopar mount and a 35 mm pinion, as far as i know. Also works with the first of the gen2 street hemis, saves you paying $1M for a rebuilt starter for your street hemi equipped car although i doubt saving money on a starter would worry an owner :) no top points and trophy for wrong starter....