Rocker Arm help

pishta said

Ok I zoomed in and I see that now. I think shimming up the shaft will help. Try this. Remove the rocker shaft and make aluminum foil shim for the shaft saddles, folded so it's 4 thick and torque em down just to see if the pattern moves in the right direction. It's free and no head removal. If the open valve tip location is under the centerline of the shaft, it will arc more toward the pushrod with the shims.

Click to expand...

I cannot do that, I have already sent the rockers back to where I bought them and put my old ones back on. From what I have learned through this process the shaft will need to move up and toward the intake to get to ideal geometry. Once I learned I would have to likely pull the heads to make these work I just went back to what I had, its too close to race season to be messing around things like this. I would have been willing to employ bolt on solutions that don't require removing and cutting on the heads. I appreciate the help very much.