6.1 Hemi 69 Barracuda Fastback Father Son Project

This is a fantastic idea. I may have to steal it as I feel like I'm on the path to start collecting parts for a G3 swap. (I already have the engine) I see you posted several pictures of the driver side with the headers. Any interference problems on the passenger side, particularly with your modified engine mount?
Thanks-

Passenger side really had zero clearance issues other than the oil filter which looks like an obvious natural fit now. I love all the clearance the QA1 K provides.
I've had the engine in and out with the headers on. Also installed the torsion bars while the headers were on, together with the 8HP70 to test fit. So far no clearance issues.
Tight clearance, valve cover to inner fender on the passenger side. Still fits though.

Trans tunnel is in, welded and body worked.
Marked up some more holes that won't be needed, to weld up in the engine compartment.
Hopefully I marked the right ones... I do know there is one with tape over it in the picture that I decided I should keep. Might use it for the Terminator X harness to pass through if it will fit...

upload_2022-3-2_21-28-52.png