Interior Door Pulls

I have a 75 Duster with a cage. The stock door rest hits the down bar. On the passenger side the arm rest barely hits the bar so I left it be. But on the driver side we kept the bar out farther to allow more room for me in the drivers seat. This didn't allow the use of the stock arm rest on the driver side. I ended up making one out of metal. Basically took a flat piece and went from the 2 arm rest screw holes. Than took a flat piece and went straight up. Took some round rod and bent a square that I welded to the flat metal going upwards. I made it so it clears the bar and gives me a good sturdy hold on the door. Before I made this I had a piece of old seat belt attached to the top of the door panel and just didn't care for that as much. I don't have any pictures at the moment, but will try and take one if I remember next time I'm in the garage.