1966 Factory V8 Valiant Signet Restoration For My Other Daughter
Got one of those jobs I was putting off done... First the best aftermarket sending unit for A Bodies is one for A-100 Trucks. It has a long arm on the float so it does not stay full forever, start to move then drop to empty in 20 miles and stay there for the rest of forever.. The Dart is fairly accurate other than with about 4 gallons it reads empty so I put a bit of a bend up on the float to see if I can make it more accurate around E. First thing to do is throw the supplied ring and gasket where it belongs and get a Detroit Muscle Technology ring and seal. It is the original thickness metal and the original material seal. Same goes for the filler tube seal, only DMT parts. The trunk floor was for multiple years so you had to cut the hole for the filler tube.
Got one of those jobs I was putting off done... First the best aftermarket sending unit for A Bodies is one for A-100 Trucks. It has a long arm on the float so it does not stay full forever, start to move then drop to empty in 20 miles and stay there for the rest of forever.. The Dart is fairly accurate other than with about 4 gallons it reads empty so I put a bit of a bend up on the float to see if I can make it more accurate around E. First thing to do is throw the supplied ring and gasket where it belongs and get a Detroit Muscle Technology ring and seal. It is the original thickness metal and the original material seal. Same goes for the filler tube seal, only DMT parts. The trunk floor was for multiple years so you had to cut the hole for the filler tube.