Squareback vs round back alternator?

New parts. Very few new products are made as well as the factory parts. :(
I would only replace damaged or worn parts.
If you have to use that coil and ballast resistor its probably OK. Original resistor specification was 0.7 Ohms?
Do you have a photo of the current coil and connections?

No specs visible on the coil, I have checked carefully.
It's the same thing here with very few products are made as well as the factory parts. Mostly scrap. I would like to use OEM parts but my network for US car parts are very poor.
As for the resistor, there were no specifications in the service manual, only the reference # and I took it ask the www. It was #1889545 which turns into #2196316 and with that nr I could find it.
Of course I don't know the credibility for those website, but it looks as it could match.
Btw I won't pay 195 USD ... The one I have found is 3 USD. I mean this is not a specific part, could use any resitance that matches the specs. But since I'm ordering other parts I threw in the basket.

IMG_20220317_132645.jpg IMG_20220317_132658.jpg upload_2022-3-17_13-34-19.png