1964 Dart Grüne Hölle Road Course/Track Day/AutoX Project

4/6/21:

Well I got sidetracked off the project for a while - The Power company took 11 Trees out of my yard that were dead for free... But I had to do the clean up - that was part of the deal... Now I am back on task.

Got the Pan all done on the outside / water checked for leaks. I used a Stock 67-76 Dart/Valiant A Body Pickup tube and the Pan was 1.5" lower than the pickup, so I had to extend the pickup tube down to the pan bottom by the same amount. - Hardware store Steel Pipe was helpful in that endeavor.... Just cut a 1.5" section and Hot glued it into the tube, and boom, the tube reaches the bottom of the pan again.


All of the rest of the work is now focused on the inside, adding Trap Doors, Pickup isolation and Baffles.


Pics:
Got a few of the leakers fixed!
51099607348_1ee27bcf26_c.jpg


51099607293_530e6bf50a_c.jpg

First try on the pickup tube extension came up ~1/2" Short.
51099607238_09bced671b_c.jpg

2nd Try; Got it down to the floor.
51099607188_5eb8d4386d_c.jpg

51099872765_135e30a101_c.jpg

51099163077_8747bbda53_c.jpg

51099147764_9e711e55f1_c.jpg

Next Up, Baffles, Trap Doors, slosh control, Oh my!

Greg