All one piece, but it was a struggle to get it in in the area between the trans crossmember and the frame connector. The gas line is on the opposite side of the car, and is stainless Where it goes through the Frame connector I split some rubber gas hose and wrapped it around the metal gas line so it doesn't wear on the metal of the frame connector. Easy to apply to protect the tube that would be hard to replace and easy to replace if it wears. The whitish tube that you see is polyethylene tube that carrys the emergency brake cable under the frame connector so that it doesn't saw on the cable. The cable slides easily on the polyethylene and the tube can be easily replaced if it wears through. When all is done I'll spray it black to make it "disappear".
