A cautionary tale when working on push rods
That's interesting. The lifters and pushrods are both CompCam components designed for this motor. the rockers are Harland Sharp also designed for this application and with a 5/16 ball adjuster.
In the image I have provided the bottom rod is the CC and the top rod is the Smith Bros. Are these examples of std and radius ball end? I'm not familiar with the actual definition of the terms.
![20220506_123026[1].jpg](https://www.forabodiesonly.com/mopar/attachments/20220506_123026-1-jpg.1715923415/ "20220506_123026[1].jpg")
![20220506_123138[1].jpg](https://www.forabodiesonly.com/mopar/attachments/20220506_123138-1-jpg.1715923416/ "20220506_123138[1].jpg")
That's interesting. The lifters and pushrods are both CompCam components designed for this motor. the rockers are Harland Sharp also designed for this application and with a 5/16 ball adjuster.
In the image I have provided the bottom rod is the CC and the top rod is the Smith Bros. Are these examples of std and radius ball end? I'm not familiar with the actual definition of the terms.
