Roof Rail Weatherstripping Tips On Install

Also, if you decide to pull the stainless trim/retainer off the car for some reason, you will see there was a foam seal between it and the body. Once the rubber is removed and you clean it up with the plastic wire wheel, you will see screws. If you remove those the stainless will come off but be aware there is a foam seal between the stainless and the body. I used self adhesive (1/4" thick (it squishes to nothing) x 1/2") foam weatherstripping from home depot to replace that. I think the seal also comes with a screw for one or both ends, I don't recall and mine is a fastback so it may be slightly different anyways. Most of this stuff didn't change much from year to year in the big picture. I'd look at mine closer but its up on the lift and a different model but it's all the same pretty much.