Pushbutton trans

I removed and refurbed the buttons on my 1964 Valiant. I had the whole assembly out and on the bench and recall you must remove the cable from the transmission for that. A good time to add a thermal sleeve over the cable where it runs near the exhaust pipe. I used silicone over fiberglass sleeve. I just cleaned the buttons and repainted, using white touch-up paint. Just smear it on and wipe off w/ a cloth lightly damp w/ lacquer thinner or such. Look like new. Before, you could barely read the letters. The shop manual shows the tricks in detaching the cable and adjusting so the detents in the transmission align with the button positions.