Big Block Kickdown Linkage
All three piece and can be used for a swap. I took a 383 auto out of a 70 Roadrunner and installed it in a 67 Dart. I used the linkage from the road runner in the dart. Small modification to clear the harness. two cuts two welds Also used the manifolds from the 70 Roadrunner. Shifter was an E-body mounted in front of the bench seat..
440 would be a different story and may require some mods due to the higher deck height. But I know if I was to do it I would make what ever I had in three piece work. Three piece is all the same concept. Eye to eye wide open throttle and eye to eye at idle. Geometry?
I even had made throttle pressure on the 671 Dyers in this truck. And I put throttle pressure on the common rail swap.
So for a fact what ever 3 piece linkage you have it can work. Your just not thinking with your dipstick Jimmy.
All three piece and can be used for a swap. I took a 383 auto out of a 70 Roadrunner and installed it in a 67 Dart. I used the linkage from the road runner in the dart. Small modification to clear the harness. two cuts two welds Also used the manifolds from the 70 Roadrunner. Shifter was an E-body mounted in front of the bench seat..
440 would be a different story and may require some mods due to the higher deck height. But I know if I was to do it I would make what ever I had in three piece work. Three piece is all the same concept. Eye to eye wide open throttle and eye to eye at idle. Geometry?
I even had made throttle pressure on the 671 Dyers in this truck. And I put throttle pressure on the common rail swap.
So for a fact what ever 3 piece linkage you have it can work. Your just not thinking with your dipstick Jimmy.
