The continuity tester confirmed my idea so wired it like that. Combined the IGN1 & IGN2 onto the FR pink wire. Everything works great. Thanks for the extra eyes on this for me.
Just as a PS to my Flaming River installation in case someone else wants to do this install:
Had to send the column back to FR because the mounting holes in the OE under dash mounting bracket did not line up with the holes in the FR column. Sent the mounting bracket to them and they changed the column mounting block to work with my bracket. The column was for an "A" Body Mopar with manual steering yet I had to cut 5 1/2" off of the "D" rod to fit. After mounting the under dash mount to the column the instructions say to put the floor mount (purchased separately) on the end of the column before installation. Nope. Take the bushing out of the floor mount, then mount the floor mount loosely to the firewall. Slide the floor mount bushing onto the column and install it. After cutting the "D" rod to fit, you'll need to use a grinder to slightly bevel the edge that goes onto the universal joint.