Firm feel k frame reinforcement

Well hopefully you guys can help on a couple of these pieces. Some I think are fairly straight forward. Couple of them, I have no idea. My welding is hit and miss, don't judge me too harshly.

Here's where I'm at,

View attachment 1715967836 View attachment 1715967835



View attachment 1715967837
View attachment 1715967838
View attachment 1715967839

These ones, I'm not sure how they are oriented and haven't been able to find any references.
"Steering box mount bottom rear"
View attachment 1715967841

"Steering box mount front"
View attachment 1715967840

I'll be sure to post the picture when it's all said and done for future reference.

Thanks.

You've got the first ones right, the ones you have questions about look like this-
The one that goes below the steering mount looks like this, it may need some trimming and you will need to bend it up at the end that meets the steering box mount. It also matters which corner goes into the K frame so if it fits really poorly trying turning it so a different point goes into the K.
img_1660-jpg.jpg

The other steering box mount gets folded corner to corner so the part with the curved edge fits into that curved section of steering mount, then the rest goes down into the corner. Again, with all of these pieces some trimming might be necessary to get them to fit tightly enough. Also, with this one you want to get it tucked in nice and tight, because if it sticks up or sticks back too much it can hit the steering box.

img_1662-jpg.jpg