Torqstorm.. let's see how it does

rumblefish360 said
1008’s at how many PSI?

You've

Toluene56 said
I swapped over to my pump gas carb. Drove around for hot august nights and overall beat the piss out of the car.

first pass on the next track day to see how the gas carb works…10.0 afr at wot. 2nd pass, pulled some jet.. 10.2-10.8 afr….. popped a head gasket again.. same spot too. I have some SCE titan ICS copper gaskets on the way and I’m gonna drop the heads off to be surfaced. So hopefully the fresh surfacing and new head gaskets help.

Tbh I expected the head gaskets to give up the ghost. They’re the felpro 1008, honestly surprised they even survived the first 2 track outings.

rumblefish360 said
That’s what they say about me and my head…. Not so much my cars head….

Have you checked block for straightness, have you looked at block deck thickness in this area? 10 lbs. boost isn't anything. also do you have a boost retard? just trying to help.
i,d also look at spraying with alcohol in frt. of supercharger even if afr. is good, cools intake charge to eliminate detonation. The 1008 has a fire ring around cyl. .