Did they make 5x4” axles for 8 3/4 rear ends?

Contact Moser Engineering, They have the proper hub size and offset for the brakes on there axles. When I bought my Moser axles for the 70 A body 8 3/4 housing with 10 inch drum brakes that was in my 66 Dart, Moser new exactly what I needed and even offered to drill both bolt patterns in them at no extra cost. Then I switched to a Dana 60 out of a 3/4 ton truck with a 30 spline Dana powerlock suregrip and 4.10 gears narrowed to the exact length of the A body 8 3/4. They sent me a set of axles for the Dana cut and drill exactly like the 8 3/4 axles so I didn't have to change out my wheel and tire combo. I run Wilwood brake on the front and drilled the rear 10 inch drums for the 4.5 inch bolt pattern, but if I ever wanted to switch it back to stock wheels the 4 inch pattern is there. I have a combined 20 years on these Moser axles(14 years with the Dana) with hundreds of 5000 rpm clutch drops with 9" slicks and 1.50 60 foots(second gear is shifted about 50 feet out) and the Moser axle are showing no signs of wear in the splines or twist in the axles lengths.