68/9 barracuda windshield stainless clips
So bringing this up as I'm at "that stage".
I have an asst and I've labelled them with measurements. To hopefully help myself and others. This might be lengthy but hopefully it will be "definitive "(with your help).
I bought a new AMD ss kit from a member on here that they no longer required. It came with a screw "kit" also with 19 in one 1 size( 0.46H×0.763W) and 4 of another size(0.52Hx0.770W)
This(I believe) is where confusion lies.
The top and side clips should be shorter as those parts of the car are the shallower when compared to the bottom.
From what I've read you need a total of 16 of the shorter clips(3 for each side, 1 for each lower corner and 8 for the top).
The bottom ledge is much deeper than sides and top and requires taller clips. For the taller clips, 7 are required (dont forget 1 shorter at each bottom corner).
So bringing this up as I'm at "that stage".
I have an asst and I've labelled them with measurements. To hopefully help myself and others. This might be lengthy but hopefully it will be "definitive "(with your help).
I bought a new AMD ss kit from a member on here that they no longer required. It came with a screw "kit" also with 19 in one 1 size( 0.46H×0.763W) and 4 of another size(0.52Hx0.770W)
This(I believe) is where confusion lies.
The top and side clips should be shorter as those parts of the car are the shallower when compared to the bottom.
From what I've read you need a total of 16 of the shorter clips(3 for each side, 1 for each lower corner and 8 for the top).
The bottom ledge is much deeper than sides and top and requires taller clips. For the taller clips, 7 are required (dont forget 1 shorter at each bottom corner).
