Anyone use the aeromotive A-2000 fuel pump ?

Trying to decipher the flow graph from Aeromotive, it appears that at 20 psi that pump pumps 800 pounds per hour. At 6 pounds per gallon that’s 133.33 gallons per hour. At 6.5 pounds per gallon 123 gallons per hour.

That’s down there with a Holley pump.

I’ve seen pump gas that weighed a little over 6 pounds per gallon and some that was over 7. That’s why you have to measure specific gravity of the fuel you are using when you test on the dyno or the BSFC number might be off.

That A1000 is too small for me. I’m not a fan of rating fuel pumps by horsepower.