Trick flow noob ?s

gzig5 said
Can you expand upon what the issues were with the PRW? I've got a new set and would be good to know if I can head off a potential problem.

Ok Well if it helps you avoid a problem then
I'll share my experience so far,
Mine keep wearing out the bushings

This was the first set.
Mike at b3 was so nice to warranty them for me since it had been over a year.
But he thought it was an oiling issue,
So he and prw both recommend adding pushrod oiling.
So I changed out the lifters to amc style
Which did seem to help ,the valve train was noticeably quieter.
That was less then a year ago.
Recently I was hearing more and more valve train noise.
So I took the rockers off and found number 8 exhaust rocker almost worn completely through the bushing!
There was one on the driver's side worn some too but not as bad.
The rest were better then the last time so adding oil did seem to help with that some.
And I was only using penn grade 10w 40
But after closer examination I found some of the roller tips wearing flat spots now.
Also almost all the roller bearings in the tips feel rough.
I'll take more pictures later to show the current set.
The pictures I posted here are from the first set.