Fellas I need correct cam plate bolts for this- all 4. Anyone ? I don't think there is 1 unbent, un-hammered on spot of that tray left, but it is on & rotates without interference.-Thanks-Mike
Use whatever bolts you can find. That stupid bolt with the hole in it is USELESS. It does zero.
If you want more oil on the timing set (you should) then find a Holley air bleed (10-32 thread) and drill about a .040 hole in it. Then drill and tap a hole in the cam plate where it covers that passenger side oil gallery. Thread the bleed into the plate and bolt on the plate.
Now you will have full pressure oil on the timing chain at all times. None of that Mickey Mouse nonsense of bolts with holes, drip trays, slingers and junk.
If you can’t find a bleed, PM me your address and I’ll send you one already drilled. If you aren’t in a hurry you can send me your plate and I’ll drill it and tap it and put the bleed in it for you.
And you don’t have to install the soft plugs on those galleries. Leave them out. If fact, you have to leave the passenger side plug out for the bleed to get oil.