Rochester Quadrajet
Here's another piece I got in a package of old 360's and a 727 that I bought. It's a Rochester Quadrajet 4-bbl carb that I've read was used on some 360's in the 80's although this one appears to be from a GM vehicle.
The primaries measure 1-3/8"" and the secondaries are 2-1/4". The linkages all move freely and the throttle shafts do not feel/appear to be sloppy in their bores. It clearly would need some cleaning and a kit but seems to be complete otherwise. And no upcharge for the grime on it!!
I'd like to get $35 plus shipping.
Edit: Per the notes/replies/info below, this carb appears to be the larger casting (800 CFM) Rochester Quadrajet as it has the "bump" noted on the Carburetion.com website. And based on the p/n 17084227, it would be from a 1984 Federal emission standard manual trans car.
Here's another piece I got in a package of old 360's and a 727 that I bought. It's a Rochester Quadrajet 4-bbl carb that I've read was used on some 360's in the 80's although this one appears to be from a GM vehicle.
The primaries measure 1-3/8"" and the secondaries are 2-1/4". The linkages all move freely and the throttle shafts do not feel/appear to be sloppy in their bores. It clearly would need some cleaning and a kit but seems to be complete otherwise. And no upcharge for the grime on it!!
I'd like to get $35 plus shipping.
Edit: Per the notes/replies/info below, this carb appears to be the larger casting (800 CFM) Rochester Quadrajet as it has the "bump" noted on the Carburetion.com website. And based on the p/n 17084227, it would be from a 1984 Federal emission standard manual trans car.