12:05 Garage- ’70 Duster build

@BergmanAutoCraft got the new SPC upper arms out to me quickly as he stated. Got them installed with no drama. With all the adjustments pulled in, I measured 6 degrees of negative camber with my digital angle finder. I adjusted them in to around 1.8 so I had some drivability on the way to the alignment shop. After the guy gets everything setup, he comes inside to grab me. The alignment was damn near dead nuts where I wanted it without him touching anything. The guy literally made a 1/2 turn to get my caster dialed in. So final alignment specs are -1.8 camber, 6.5 caster, 1/32 toe. This is the most camber and caster I've ever run and I can tell the difference just street driving. Can't wait to get it on the autocross!
Sorry, I didn't take any pictures of them installed. Everyone knows what they look like... Now time to shine the turd up and load up for MOPARTY!