@gzig5 Yes, on a 10.5-1 - .030-340, EDELBROCK 750, RPM-AG, (Is was a 1.5 factory rocker arm, I just measured pushrod length yesterday for a move to—)
Comp Cams 1.6 roller rockers, Summits 1-5/8 headers into a Summit 2-1/2 exhaust. MP viscous fan and a aluminum radiator. MP distributor.
Cam card below;
I had Comp Cams modify this HFT from a 110 to a 108.
Valve lift is now .582. I haven’t run it with the new valve lift yet.
Nice. Love the idle lope. That's pretty close to the 340 combo I'll have, exception being Hooker 1 3/4" headers and the cam recommended by Jones is SFT 244/252 @.050" .365"/.364" Lobe Lift 108 LSA. Will use an A833 trans. I need to start measuring the bores to see if it will still work with the standard bore pistons or if I'll have to get it bored this winter. After it's running with the AirGap, I've got an M1 intake and an Edelbrock TR5 to play with.