Stainless, Bushed PRW Rocker Arms

There was nothing wrong with the old comp rockers that had no bushings there was something wrong with The Rocker shafts that came with them and then there was more wrong when somebody didn't line the cam bearings upright or somebody didn't orientate the shafts right or they have the adjusters too far one way or the other because the push rods are too short and if they didn't add the extra push right oil and just for ***** and giggles they'll wish they had once they had a combination of all that stuff.
The shafts that came with them 'early comps' ..the rockers kind of fit a little oose on them for my liking. After all that crap I already listed it could be that those rocker shafts were the real problem or just the cheap portion of that production who knows. I do know I've used the early comp rockers with Dan Dvorak thick wall induction hardened shafts.. which will not gal and weld like your standard banana grooved or not rocker shafts from anyone else - I've run just under 500 lb range open with a constant 2-220 lbs on the seat..and there perfect looking, like new...a decade later.
These shafts ' the dvorak's' have the two oiling holes because they were designed for the needle-bearing style rockers . The comp Rockers fit n slide fine.. but they dont just drop on like others...wobbly and loose like a........... they fit like they have a designed oil clearance of .002 at the max. I prefer that.
What's funny is be hard-pressed to find many articles about and picture showing the galling and I remember seeing it here around 2008 or '09. I did experience a little bit of an oiling issue to the pushrod cup because I decided to use a ball adjuster from Harlan Sharp and I don't believe they were getting oil or are the carrying oil design but I'm just thinking about something that I haven't looked at in a min...a long min. At one time I had one of every rocker they made as in for a small block Dodge I don't know if I have any new style prws but I sure have the old crap the pro comps the no names the 273s the MP 273s that are pushed the comps and all that boring sht.
I thought it might be a good video maybe I'll do that.