Rocker sweep pattern

We did run it for about 200 miles. It was seeping antifreeze into cylinder number 3. So my buddy took it to have the head gasket replaced and the head checked. That’s when this snow balled into a total rebuild. The guy replaced every valve and valve guide and redid the valve job. He rejoined the cylinders and replaced the rings. He said the cylinders didn’t have any cross hatch left. Looked like it had 50,000 miles on it. He replaced the bearings because they only had .0003 thou (that’s 3/10s of a thousands of an inch)clearance. He said there wasn’t any damage yet but ther would of been if he had driven it much longer. Didn’t polish the crank or replace the timing set. Didn’t replace the cam, lifters, oil pump or valve springs, retainers and locks. Kim