My car has been running great for while but the last time I drove it I got it home and left it outside. After dinner I decided to wash the windows inside and out. Got in the car and it turned over fine but would not start......No spark was the cause. While pushing down on the bulkead connectors my fusible link came apart right where it connects to the harness.....I figured its as good time to replace my bulkhead connectors and remove clean and place all the wires in the 3 new connectors I have. I also ordered a new fusible link and 30 male and 20 female packard connectors. I don't have a proper crimping tool so I ordered one I found online with the help of FABO. Fusible link should be here tomorrow. Not sure about the connectors and crimping tool. I removed cleaned and placed all wires in new connectors today and only broke one.. When I get everything else I ordered in the coming days I should be good to go. What are the chances my car is going to fire up without any further issues. Some of the connectors were not locked in place and they were all pretty grungy. All are like new now.
